System : – System Down, up, stop, emergency inputs and external sensor inputs/outputs (e.g. loop detector, safety sensor, traffic light, remote control, etc.).
System alerts with an audio signal during lowering and raising operation. A loud siren alert in case of alarm or emergency.
Blocker Unit (Underground Unit): – All parts are colored with industrial paint with two components over anticorrosive primer application. Body is structured and strengthened with U-shaped beams.
Product is designed that no vehicle crashing effect can displace it after embedded or installed in to the ground.
Blocker Unit (Impact Blocking Unit) : –Top plates (vehicle pass through surface) are hot dip galvanized and electrostatic powder coated. All other parts are colored with industrial paint with two components over anticorrosive primer application.
Moving parts are colored with RAL 1003 yellow (impact surface yellow-black) and fixed road surface plates in RAL 9005 black. In addition, the impact surface is finished with reflective signs and warnings.
Control System : – 3 buttons for up, down and stop operations and 1 button for emergency stop are contained in a box that is suitable
for outdoor use (optionally, 1 button for EFO-fast raise up).
System stops its movement with the command from safety sensor (opt.) and loop detectors (opt.).
Contains built-in LED indicators and 10 m cable.
The system works with PLC as standard.
Power-off Situation : – Road Blocker remains in its position in case of power-off. Optionally; can be lowered or raised and lowered by battery pack with 24V DC motor. Battery pack provides min. 60-100 movements when fully charged (minimum number of movements vary depending on the number of blockers in the set to be fed).
